//-----------------------------------------------------------------------------
//  Basler pylon SDK
//  Copyright (c) 2010-2021 Basler AG
//  http://www.baslerweb.com
//  Author:  Andreas Gau
//-----------------------------------------------------------------------------
/*!
\file
\brief An instant camera configuration for software trigger,
       Use together with Pylon::CInstantCamera::WaitForFrameTriggerReady() and Pylon::CInstantCamera::ExecuteSoftwareTrigger().
       This  instant camera configuration is provided as header-only file. The code
       can be copied and modified for creating own configuration classes.
*/

#ifndef INCLUDED_SOFTWARETRIGGERCONFIGURATION_H_4655834
#define INCLUDED_SOFTWARETRIGGERCONFIGURATION_H_4655834

#include <pylon/Platform.h>

#ifdef _MSC_VER
#   pragma pack(push, PYLON_PACKING)
#endif /* _MSC_VER */

#include <pylon/InstantCamera.h>
#include <pylon/ParameterIncludes.h>
#include <pylon/ConfigurationHelper.h>

namespace Pylon
{
    /** \addtogroup Pylon_InstantCameraApiGeneric
     * @{
     */

    /*!
    \class  CSoftwareTriggerConfiguration
    \brief  Changes the configuration of the camera so that the acquisition of frames is triggered by software trigger.
            Use together with CInstantCamera::WaitForFrameTriggerReady() and CInstantCamera::ExecuteSoftwareTrigger().

        The %CSoftwareTriggerConfiguration is provided as header-only file.
        The code can be copied and modified for creating own configuration classes.
    */
    class CSoftwareTriggerConfiguration : public CConfigurationEventHandler
    {
    public:
        /// Apply software trigger configuration.
        static void ApplyConfiguration( GenApi::INodeMap& nodemap )
        {
            using namespace GenApi;

            //Disable compression mode.
            CConfigurationHelper::DisableCompression( nodemap );

            //Disable GenDC streaming.
            CConfigurationHelper::DisableGenDC( nodemap );

            //Select image component.
            CConfigurationHelper::SelectRangeComponent( nodemap );

            // Disable all trigger types except the trigger type used for triggering the acquisition of
            // frames.
            {
                // Get required enumerations.
                CEnumParameter triggerSelector( nodemap, "TriggerSelector" );
                CEnumParameter triggerMode( nodemap, "TriggerMode" );

                // Check the available camera trigger mode(s) to select the appropriate one: acquisition start trigger mode
                // (used by older cameras, i.e. for cameras supporting only the legacy image acquisition control mode;
                // do not confuse with acquisition start command) or frame start trigger mode
                // (used by newer cameras, i.e. for cameras using the standard image acquisition control mode;
                // equivalent to the acquisition start trigger mode in the legacy image acquisition control mode).
                String_t triggerName( "FrameStart" );
                if (!triggerSelector.CanSetValue( triggerName ))
                {
                    triggerName = "AcquisitionStart";
                    if (!triggerSelector.CanSetValue( triggerName ))
                    {
                        throw RUNTIME_EXCEPTION( "Could not select trigger. Neither FrameStart nor AcquisitionStart is available." );
                    }
                }

                // Get all enumeration entries of trigger selector.
                StringList_t triggerSelectorEntries;
                triggerSelector.GetSettableValues( triggerSelectorEntries );

                // Turn trigger mode off for all trigger selector entries except for the frame trigger given by triggerName.
                for (StringList_t::const_iterator it = triggerSelectorEntries.begin(); it != triggerSelectorEntries.end(); ++it)
                {
                    // Set trigger mode to off.
                    triggerSelector.SetValue( *it );
                    if (triggerName == *it)
                    {
                        // Activate trigger.
                        triggerMode.SetValue( "On" );

                        // The trigger source must be set to 'Software'.
                        CEnumParameter( nodemap, "TriggerSource" ).SetValue( "Software" );

                        //// Alternative hardware trigger configuration:
                        //// This configuration can be copied and modified to create a hardware trigger configuration.
                        //// Remove setting the 'TriggerSource' to 'Software' (see above) and
                        //// use the commented lines as a starting point.
                        //// The camera user's manual contains more information about available configurations.
                        //// The Basler pylon Viewer tool can be used to test the selected settings first.

                        //// The trigger source must be set to the trigger input, e.g. 'Line1'.
                        //CEnumParameter(nodemap, "TriggerSource").SetValue("Line1");

                        ////The trigger activation must be set to e.g. 'RisingEdge'.
                        //CEnumParameter(nodemap, "TriggerActivation").SetValue("RisingEdge");
                    }
                    else
                    {
                        triggerMode.TrySetValue( "Off" );
                    }
                }
                // Finally select the frame trigger type (resp. acquisition start type
                // for older cameras). Issuing a software trigger will now trigger
                // the acquisition of a frame.
                triggerSelector.SetValue( triggerName );
            }


            //Set acquisition mode to "continuous"
            CEnumParameter( nodemap, "AcquisitionMode" ).SetValue( "Continuous" );
        }

        //Set basic camera settings.
        virtual void OnOpened( CInstantCamera& camera )
        {
            try
            {
                ApplyConfiguration( camera.GetNodeMap() );
                // Probe max packet size
                CConfigurationHelper::ProbePacketSize( camera.GetStreamGrabberNodeMap() );
            }
            catch (const GenericException& e)
            {
                throw RUNTIME_EXCEPTION( "Could not apply configuration. Pylon::GenericException caught in OnOpened method msg=%hs", e.what() );
            }
            catch (const std::exception& e)
            {
                throw RUNTIME_EXCEPTION( "Could not apply configuration. std::exception caught in OnOpened method msg=%hs", e.what() );
            }
            catch (...)
            {
                throw RUNTIME_EXCEPTION( "Could not apply configuration. Unknown exception caught in OnOpened method." );
            }
        }
    };

    /**
     * @}
     */
}

#ifdef _MSC_VER
#   pragma pack(pop)
#endif /* _MSC_VER */

#endif /* INCLUDED_SOFTWARETRIGGERCONFIGURATION_H_4655834 */